Oklahoma Sound
Model Number:
MIC-1
$49.00
Metallic look handheld unidirectional electret condenser mic has 9' cable for freedom of movement. Frequency and sensitivity matches all OSC lecterns.
Oklahoma Sound
Model Number:
MIC-2
$49.00
Metallic look dynamic unidirectional handheld microphone has 9 ft cable and operates on most OSC lecterns and other equipment.
Oklahoma Sound
Model Number:
MIC-3
$39.00
Lapel style electret condenser microphone comes with clip to connect to your tie, collar, shirt or blouse. 10 ft. cable for hands free maneuverability.
Oklahoma Sound
Model Number:
MIC-X
$25.00
20' Mic Extension Cable
Sound-Craft Systems
Model Number:
CSY
$115.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Add a distinctive look to your non-amplified Club Series Lectern by replacing the standard grille cloth panel with a matching veneered solid wood front panel.
Produits Urbann Inc
Model Number:
SIG-F1-V13
$64.95
Dust Cover Dust is everywhere around us and stressful situations are encountered everyday. You can avoid these two by letting this dust cover become your friend and protect your lectern from dust and most scratches. You don't want to dust off your...
Produits Urbann Inc
Model Number:
SIG-B2
$59.95
Gooseneck Microphone XLR Connector Module You want to use a thin microphone with your lectern? You will need this connector to connect your microphone into. It includes the connector itself and a 90 cm (36") audio cable that goes down inside the lectern...
Produits Urbann Inc
Model Number:
SIG-B5
$21.95
Grommet Module Hanging cables alongside a lectern are not very elegant. Use this grommet to convert one of the openings of the lectern and hide wiring inside. Works with the Y1, Y7, K1, K2, K3, K6 and K9 lecterns.
Produits Urbann Inc
Model Number:
SIG-B3
$59.95
Handheld Microphone holder with clip Imagine yourself with a microphone in your hand, walking on the stage towards the lectern. Where will you put the microphone? Well, this microphone holder is your solution : it will keep your microphone close to your...
Produits Urbann Inc
Model Number:
SIG-U6
$94.95
LED Reading Lamp with Articulating Arm Ever wish to have a small light source right over your notes? Insufficient stage lighting won't bother you anymore with this thin reading light. You can even fine tune the perfect lighting for every situation using...
Oklahoma Sound
Model Number:
2CS
$25.00
This caster kit allows you to mobilize your Model #222 Full Floor Lectern. Set of four casters.
Oklahoma Sound
Model Number:
300
$189.00
300 Extension Speaker Double and triple your sound range from any OSC lectern.  Ideal for transmission of sound to separate rooms.  Features two 8" full range speakers with 35' cable and connecting hardware.  Cabinet is 23"H x...
Sound-Craft Systems
Model Number:
LCDMNT
$209.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Adjustable LCD/Flat Panel monitor mount. VESA compliant. Allows monitor adjustment for best viewing angle. Ideal for multiple users.
Oklahoma Sound
Model Number:
BRL
$45.00
Attractive brass finish reading lamp with on/off switch is available with brass clip to connect your reading surface or factory installed. Operates on 117 AC .25 Watt bulb included.
Sound-Craft Systems
Model Number:
TMR
$259.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Countdown timer with clock. LED display with green-yellow-red indicator lamps. Requires AC power supply (included).
Sound-Craft Systems
Model Number:
DCD
$419.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Slide-out document camera drawer. Supplied with lock and equipped with heavy-duty ball bearing slides.
Sound-Craft Systems
Model Number:
DCDLFT
$869.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Manual document camera lift. Note: Lift only. Does not include document camera drawer. MANUAL DOCUMENT CAMERA LIFT TO BE ORDERED WITH DCD DOCUMENT CAMERA DRAWER -...
Sound-Craft Systems
Model Number:
FDCS-MML
$255.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Folding document camera shelf.
Sound-Craft Systems
Model Number:
KD
$275.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Your keyboard and mouse are always at hand when you need them with this convenient locking drawer. Heavy-duty steel ball bearing industrial grade slides insure...
Sound-Craft Systems
Model Number:
CPO
$85.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Simplify power and signal cable routing by including one or more cable ports on your lectern's wood surface.
Sound-Craft Systems
Model Number:
CCB
$125.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Cable storage well with hinged cover only. Must order cable port, duplex outlet etc. to go inside box separately.
Sound-Craft Systems
Model Number:
PC
$699.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.18 WATT RMS, CARDIOD ELECTRET MIC, 8-4" CONE SPEAKERS. TC AND TCFLS SUPPLIED WITH 4-4" SPEAKERS. AC AND BATTERY OPERATED. MUST BE FACTORY INSTALLED. FOR LC, TC,...
Sound-Craft Systems
Model Number:
CSB
$115.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Add a distinctive look to your non-amplified Club Series Lectern by replacing the standard grille cloth panel with a matching veneered solid wood front panel.
Sound-Craft Systems
Model Number:
CSR
$115.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Add a distinctive look to your non-amplified Club Series Lectern by replacing the standard grille cloth panel with a matching veneered solid wood front panel.
Sound-Craft Systems
Model Number:
CSA
$115.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Add a distinctive look to your non-amplified Club Series Lectern by replacing the standard grille cloth panel with a matching veneered solid wood front panel.
Sound-Craft Systems
Model Number:
CSK
$115.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Add a distinctive look to your non-amplified Club Series Lectern by replacing the standard grille cloth panel with a matching veneered solid wood front panel.
Sound-Craft Systems
Model Number:
CSM
$115.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Add a distinctive look to your non-amplified Club Series Lectern by replacing the standard grille cloth panel with a matching veneered solid wood front panel.
Sound-Craft Systems
Model Number:
CSX
$115.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Add a distinctive look to your non-amplified Club Series Lectern by replacing the standard grille cloth panel with a matching veneered solid wood front panel.
Sound-Craft Systems
Model Number:
CSO
$115.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Add a distinctive look to your non-amplified Club Series Lectern by replacing the standard grille cloth panel with a matching veneered solid wood front panel.
Sound-Craft Systems
Model Number:
CSW
$115.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Add a distinctive look to your non-amplified Club Series Lectern by replacing the standard grille cloth panel with a matching veneered solid wood front panel.
Sound-Craft Systems
Model Number:
CWS
$239.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Combination flat/sloped worksurface. Shown with optional clock/timer.
Sound-Craft Systems
Model Number:
CF
$149.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Don't lose your cool. Protect heat-sensitive equipment with a factory installed cooling fan in the base of your lectern or cabinet.
Da-Lite
Model Number:
44516
$231.00
Padded and lined nylon covers keep Da-Lite lecterns protected.
Da-Lite
Model Number:
44512
$231.00
Cover for 25" Floor and Stacking Lecterns (all models except Hamilton)
Da-Lite
Model Number:
44517
$256.00
Padded and lined nylon covers keep Da-Lite lecterns protected.
Da-Lite
Model Number:
44513
$256.00
Cover for 32" Floor Lecterns (all models except Hamilton)
Da-Lite
Model Number:
76700
$256.00
Padded and lined nylon covers keep Da-Lite lecterns protected.
Sound-Craft Systems
Model Number:
DPLX
$125.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Plan ahead and include a work surface mounted contemporary-styled duplex receptacle.
Sound-Craft Systems
Model Number:
H
$1,119.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Short or tall, our built-in optional height adjustment for the LE1 accomodates them all. Choose from either our manual or our electric motor assisted lift...
Sound-Craft Systems
Model Number:
HA-MML
$2,199.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Hydraulic height adjustment system now offered on 36" Presenter style multimedia lecterns. Allows adjustment from approximately 44" to 50" in height. Adds 6" to...
Sound-Craft Systems
Model Number:
EHD
$325.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.
Sound-Craft Systems
Model Number:
EHD-RCSC
$325.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.
Sound-Craft Systems
Model Number:
LPDFCS
$229.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.
Sound-Craft Systems
Model Number:
EAMNT
$349.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.This mount gives you the ability to quickly find the ultimate ergonomic position for your flat panel display without sacrificing work surface area. Tilt up and...
Da-Lite
Model Number:
93535
$108.00
Gooseneck Light
Sound-Craft Systems
Model Number:
GSM
$299.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.For those with and existing house public address system who only need a microphone on their lectern, we offer a contemporary slim profile unidirectional electric...
Sound-Craft Systems
Model Number:
GS
$119.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.For those who wish to supply their own microphone and only need a support arm, we offer a shock-mounted arm. 19" Flexible mic arm with 5/8" - 27 male...
Oklahoma Sound
Model Number:
GSN-Black
$29.00
13" Flexible Gooseneck Mount Assembly Model - GSN Available in Black or Chrome. This 13" Flexible Gooseneck Mount Assembly securely screws into Podium or Lectern surfaces. Usually requires the addition of the Oklahoma Sound MH - Microphone...
Sound-Craft Systems
Model Number:
ESB
$155.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Add a distinctive look to your non-amplified Keynote Series Lectern, by replacing the standard grille cloth with a matching Black Lacquer on Oak solid wood front...
Sound-Craft Systems
Model Number:
ESR
$155.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Add a distinctive look to your non-amplified Keynote Series Lectern, by replacing the standard grille cloth with a matching Dark Cherry veneered solid wood front...
Sound-Craft Systems
Model Number:
ESK
$155.00
ACCESSORY ITEM - MUST BE ORDERED WITH LECTERNThis Product is custom made and non-returnable.Add a distinctive look to your non-amplified Keynote Series Lectern, by replacing the standard grille cloth with a matching Dark Oak veneered solid wood front...